The model RC-1T2A controller has been specifically designed to provide remote
control of airport lighting systems which require only one control function. This control
system will allow the approaching pilot to turn the runway lights on at his discretion. The
RC-1T2A is enclosed in a weather-proof water-tight housing and is conservatively
designed for continuous outdoor unattended operation.
The RC-1T2A receiver controller complies with FCC rules and regulations Part 15.
This system is activated upon receiving a series of 5 pulses of R.F. energy within a 5 second period. After receipt of five pulses the relay closes and sends 120vac out through the control one output line.
The solid-state timer will continue to operate for 15 minutes after which it will
cause the system to revert to the original "off" condition. The timer is reset by the receipt
of five pulses at any time, reinitiating the 15 minute "run" cycle. The operating time may be
selected in 15-minute increments from 15 minutes to 1 hour by setting DIP switches on the
During testing, the 15-minute operating period may be terminated by pressing the
Reset Switch on the base assembly.